AQA GCSE · Physics 8463

Current, potential difference and resistance: Practice Questions

5 multiple-choice questions marked as you go, and 5 written questions with worked solutions. All on Current, potential difference and resistance.

10 questions24 marksFree, no account

Question 1

1 mark

Which equation correctly links charge flow (\(Q\)), current (\(I\)), and time (\(t\))?

Question 2

1 mark

How does the resistance of a filament lamp change as the temperature of the filament increases?

Question 3

1 mark

A total of \(300\text{ C}\) of charge flows through a component when a potential difference of \(12\text{ V}\) is applied. How much energy is transferred?

Question 4

1 mark

Which of the following circuit symbols correctly represents a thermistor?

Question 5

1 mark

A heater is connected to a \(230\text{ V}\) mains supply. If the current through the heater is \(8\text{ A}\), calculate the power of the heater.

Question 6

2 marks

A resistor has a resistance of \( 20\ \Omega \). Calculate the potential difference required to move a current of \( 0.2\ \text{A} \) through it.

Write your answer out first, then check it against the worked solution.

Question 7

3 marks

Explain how the resistance of a Light Dependent Resistor (LDR) is affected when it is moved from a bright room into a dark cupboard.

Write your answer out first, then check it against the worked solution.

Question 8

5 marks

The provided graph shows the I-V characteristic of a filament lamp. Explain, in terms of particles, why the resistance increases at higher potential differences.

Write your answer out first, then check it against the worked solution.

Question 9

4 marks

A student builds a simple circuit containing a battery and a single fixed resistor with a resistance of \( 15\ \Omega \).

a) Name the circuit component that should be connected in series with the resistor to measure the current.
b) When the circuit is closed, the potential difference across the resistor is \( 6.0\ \text{V} \). Calculate the current flowing through the resistor. Use the equation: \( V = I \times R \).

Write your answer out first, then check it against the worked solution.

Question 10

5 marks

Filament lamps are examples of non-ohmic components. A student sets up a circuit to investigate the I-V characteristic of a filament lamp.

a) Describe how the student should connect an ammeter and a voltmeter to the lamp to measure the necessary values.
b) Explain why the resistance of the filament lamp increases as the temperature of the filament increases. Use the concept of particles in your answer.
c) Sketch the expected I-V characteristic graph for the filament lamp, showing both positive and negative values of potential difference.

Write your answer out first, then check it against the worked solution.

* The content provided by thinka is generated by AI and may not always be accurate or up-to-date. Please use it as a supplementary resource and verify with official materials.

You've seen the model answer. Now get yours marked.

This page can show you how a good answer looks. It cannot tell you what your answer was missing. thinka marks your written work against the real mark scheme in about 15 seconds.

Get My Answers Marked Back to the notes

Want more questions like these? Get a fresh set on this topic, marked as you go.