AP · thinka-original Practice Paper

2023 AP AP Calculus AB Practice Paper with Answers

Thinka May 2023 AP-Style Mock — AP Calculus AB

54 marks90 mins2023
An original Thinka practice paper modelled on the structure and difficulty of the May 2023 AP AP Calculus AB paper. Not affiliated with or reproduced from AP.

Section II, Part A: Graphing Calculator Required

A graphing calculator is required for these 2 questions. Set your calculator to radian mode. Always show the mathematical setups used for calculator-evaluated answers. Numerical answers should be accurate to 3 decimal places.
2 Question · 18 marks
Question 1 · free-response
9 marks

A water treatment facility processes wastewater through an advanced filtration system. The rate of filtration is modeled by a differentiable function \(R\), where \(R(t)\) is measured in cubic meters per hour and \(t\) is measured in hours since the start of the 12-hour workday. Selected values of \(R(t)\) are given in the table below.





\(t\) (hours)
0
2
5
8
10
12


\(R(t)\) (cubic meters per hour)
12
18
26
22
18
14



(a) Using correct units, interpret the meaning of \(\int_{2}^{10} R(t)\,dt\) in the context of the problem. Use a left Riemann sum with the three subintervals \([2, 5]\), \([5, 8]\), and \([8, 10]\) to approximate the value of \(\int_{2}^{10} R(t)\,dt\).



(b) Must there exist a value of \(c\), for \(2 < c < 10\), such that \(R'(c) = 0\)? Justify your answer.



(c) The rate of filtration can also be modeled by the function \(W(t) = 10 + 15\sin\left(\frac{\pi t}{12}\right) + 2\ln(t + 1)\) for \(0 \le t \le 12\). Using this model, find the average rate of filtration of wastewater over the time interval \(0 \le t \le 12\). Show the setup for your calculations.



(d) Using the model \(W\) defined in part (c), find the value of \(W'(7)\). Interpret the meaning of your answer in the context of the problem.

Show answer & marking scheme

Worked solution

(a)


\(\int_{2}^{10} R(t)\,dt\) represents the total volume of wastewater (in cubic meters) filtered from \(t = 2\) hours to \(t = 10\) hours.


Using a left Riemann sum with the given subintervals \([2, 5]\), \([5, 8]\), and \([8, 10]\):


\(\int_{2}^{10} R(t)\,dt \approx R(2)(5 - 2) + R(5)(8 - 5) + R(8)(10 - 8)\)


\(= 18(3) + 26(3) + 22(2) = 54 + 78 + 44 = 176\text{ cubic meters}\).



(b)


The function \(R\) is given to be differentiable on \([0, 12]\), which implies \(R\) is continuous on \([2, 10]\) and differentiable on \((2, 10)\).


The average rate of change on \([2, 10]\) is:


\(\frac{R(10) - R(2)}{10 - 2} = \frac{18 - 18}{8} = 0\).


By the Mean Value Theorem (or Rolle's Theorem), there must exist a value \(c\) in \(2 < c < 10\) such that \(R'(c) = 0\).



(c)


The average rate of filtration over \([0, 12]\) is given by the average value formula:


\(\text{Average rate} = \frac{1}{12 - 0}\int_{0}^{12} W(t)\,dt\)


\(= \frac{1}{12}\int_{0}^{12} \left(10 + 15\sin\left(\frac{\pi t}{12}\right) + 2\ln(t + 1)\right) dt \approx \frac{277.280}{12} \approx 23.107\text{ cubic meters per hour}\) (or \(23.106\)).



(d)


Using a graphing calculator to compute the numerical derivative:


\(W'(7) \approx -0.766\) (or \(-0.767\)).


Meaning in context: At time \(t = 7\) hours, the rate at which wastewater is being filtered is decreasing at a rate of \(0.766\) cubic meters per hour per hour (or \(\text{m}^3/\text{hr}^2\)).

Marking scheme

Part (a): 3 points
- 1 point for interpretation with units (must reference total cubic meters/volume of water filtered and the time interval t = 2 to t = 10 hours)
- 1 point for the form of the left Riemann sum: (18)(3) + (26)(3) + (22)(2)
- 1 point for the numerical answer: 176

Part (b): 2 points
- 1 point for presenting R(10) - R(2) = 0 or (18 - 18)/8 = 0 (or stating R(2) = R(10))
- 1 point for answer with justification (must explicitly state that R is continuous because it is differentiable, and reference MVT or Rolle's Theorem)

Part (c): 2 points
- 1 point for the average value integral setup: (1 / 12) * \int_{0}^{12} W(t) dt
- 1 point for the correct answer: 23.107 (or 23.106)

Part (d): 2 points
- 1 point for the value of W'(7): -0.766 (or -0.767)
- 1 point for correct interpretation in context including units (cubic meters per hour per hour or m^3/hr^2) and time t = 7 hours.
Question 2 · free-response
9 marks
A robotic test vehicle travels along a straight laboratory track for \(0 \le t \le 10\) seconds. The velocity of the vehicle is modeled by the differentiable function

\[v(t) = 3.5e^{-0.08t}\sin\left(\frac{\pi}{4}t\right),\]

where \(t\) is measured in seconds and \(v(t)\) is measured in meters per second. At time \(t = 0\), the position of the vehicle is \(x(0) = 5\) meters.

(a) Find all times \(t\) in the interval \(0 < t < 10\) at which the vehicle changes direction. Give a reason for your answer.

(b) Find the acceleration of the vehicle at time \(t = 3\) seconds. Show the setup for your calculations, and indicate units of measure. Is the vehicle speeding up or slowing down at time \(t = 3\) seconds? Give a reason for your answer.

(c) Find the position of the vehicle at time \(t = 6\) seconds. Show the setup for your calculations.

(d) Find the total distance traveled by the vehicle over the time interval \(0 \le t \le 10\) seconds. Show the setup for your calculations.
Show answer & marking scheme

Worked solution

### Part (a)
The vehicle changes direction when its velocity changes sign.
Set \(v(t) = 0\) for \(0 < t < 10\):
\[3.5e^{-0.08t}\sin\left(\frac{\pi}{4}t\right) = 0 \implies \sin\left(\frac{\pi}{4}t\right) = 0\]
\[\frac{\pi}{4}t = \pi \implies t = 4\]
\[\frac{\pi}{4}t = 2\pi \implies t = 8\]
Since \(v(t) > 0\) on \((0, 4)\), \(v(t) < 0\) on \((4, 8)\), and \(v(t) > 0\) on \((8, 10)\), the velocity changes sign at \(t = 4\) seconds and \(t = 8\) seconds.
Therefore, the vehicle changes direction at \(t = 4\) and \(t = 8\) seconds.

---

### Part (b)
Acceleration is given by \(a(t) = v'(t)\).
Using a calculator:
\[a(3) = v'(3) \approx -1.685\text{ meters per second per second (or m/s}^2\text{)}.\]
To determine if the vehicle is speeding up or slowing down at \(t = 3\), check the signs of velocity and acceleration:
\[v(3) \approx 1.947 > 0\]
\[a(3) \approx -1.685 < 0\]
Because \(v(3)\) and \(a(3)\) have opposite signs, the vehicle is slowing down at \(t = 3\) seconds.

---

### Part (c)
The position at \(t = 6\) is given by:
\[x(6) = x(0) + \int_0^6 v(t)\,dt\]
\[x(6) = 5 + \int_0^6 3.5e^{-0.08t}\sin\left(\frac{\pi}{4}t\right)\,dt\]
Using a calculator to evaluate the definite integral:
\[\int_0^6 v(t)\,dt \approx 4.689\]
\[x(6) = 5 + 4.689 = 9.689\text{ meters (or } 9.688\text{)}.\]

---

### Part (d)
The total distance traveled over \(0 \le t \le 10\) is the integral of the vehicle's speed:
\[\text{Total distance} = \int_0^{10} |v(t)|\,dt\]
\[= \int_0^{10} \left| 3.5e^{-0.08t}\sin\left(\frac{\pi}{4}t\right) \right|\,dt\]
Evaluating using a calculator:
\[\text{Total distance} \approx 15.266\text{ meters}.\]

Marking scheme

### Part (a) [2 points]
- 1 point for considering \(v(t) = 0\) or the sign of \(v(t)\).
- 1 point for correct answers (\(t = 4\) and \(t = 8\)) with reason.
- Scoring note: A response that states \(t = 4, 8\) without justification receives 0 out of 2 points. The reason must mention that \(v(t)\) changes sign at these times.

### Part (b) [3 points]
- 1 point for setup and numerical value of \(a(3) = v'(3) \approx -1.685\).
- 1 point for acceleration units (\(\text{m/s}^2\) or meters per second per second).
- 1 point for conclusion (slowing down) with valid reason referencing the opposite signs of \(v(3)\) and \(a(3)\).
- Scoring note: The connection \(a(t) = v'(t)\) or \(a(3) = v'(3)\) must be explicitly shown.

### Part (c) [2 points]
- 1 point for integral setup \(\int_0^6 v(t)\,dt\) or \(5 + \int_0^6 v(t)\,dt\).
- 1 point for correct final answer: \(9.689\) (or \(9.688\)).

### Part (d) [2 points]
- 1 point for integral setup \(\int_0^{10} |v(t)|\,dt\) or equivalent sum of integrals: \(\int_0^4 v(t)\,dt - \int_4^8 v(t)\,dt + \int_8^{10} v(t)\,dt\).
- 1 point for correct final answer: \(15.266\) (or \(15.265\)).

Ready to test yourself?

Turn these notes into exam-style practice. Get unlimited AI questions on this topic with instant marking and explanations.

Practice This Topic

Section II, Part B: No Calculator Allowed

No calculator is allowed for these 4 questions. Clearly show all analytical reasoning, derivative and integral setups, and justifications.
4 Question · 36 marks
Question 1 · subjective
9 marks
A metal block is heated and then placed in a cooling chamber where the surrounding temperature is held constant. The temperature of the block is modeled by a differentiable function \(W\), where \(W(t)\) is measured in degrees Celsius (\(^\circ\text{C}\)) and \(t\) is measured in minutes for \(t \ge 0\). The function \(W\) satisfies the differential equation

\[\frac{dW}{dt} = -\frac{1}{8}(W - 10)\]

At time \(t = 0\), the temperature of the block is \(90^\circ\text{C}\). It is known that \(W(t) > 10\) for all \(t \ge 0\).

(a) Write an equation for the line tangent to the graph of \(W\) at \(t = 0\). Use this line to approximate \(W(2)\), the temperature of the block at time \(t = 2\) minutes.

(b) Write an expression for \(\frac{d^2W}{dt^2}\) in terms of \(W\). Use \(\frac{d^2W}{dt^2}\) to determine whether the approximation found in part (a) is an underestimate or an overestimate for the actual value of \(W(2)\). Give a reason for your answer.

(c) Use separation of variables to find an expression for \(W(t)\), the particular solution to the differential equation \(\frac{dW}{dt} = -\frac{1}{8}(W - 10)\) with initial condition \(W(0) = 90\).

(d) Using the expression for \(W(t)\) found in part (c), find \(\lim_{t \to \infty} W(t)\). Interpret the meaning of this value in the context of the problem.
Show answer & marking scheme

Worked solution

(a)
At \(t = 0\), \(W = 90\).
\[\left.\frac{dW}{dt}\right|_{t=0} = -\frac{1}{8}(90 - 10) = -\frac{1}{8}(80) = -10\]
An equation for the tangent line at \((0, 90)\) is:
\[y - 90 = -10(t - 0) \implies y = 90 - 10t\]
Using the tangent line to approximate \(W(2)\):
\[W(2) \approx 90 - 10(2) = 70^\circ\text{C}\]

(b)
Differentiating \(\frac{dW}{dt} = -\frac{1}{8}(W - 10)\) with respect to \(t\):
\[\frac{d^2W}{dt^2} = -\frac{1}{8}\left(\frac{dW}{dt}\right) = -\frac{1}{8}\left(-\frac{1}{8}(W - 10)\right) = \frac{1}{64}(W - 10)\]
Because \(W(t) > 10\) for all \(t \ge 0\), \(\frac{d^2W}{dt^2} = \frac{1}{64}(W - 10) > 0\).
Since the second derivative is positive, the graph of \(W\) is concave up on the interval \([0, 2]\). Therefore, the tangent line lies below the curve, meaning the tangent line approximation \(W(2) \approx 70^\circ\text{C}\) is an underestimate.

(c)
Separating variables:
\[\frac{1}{W - 10}\, dW = -\frac{1}{8}\, dt\]
Integrating both sides:
\[\int \frac{1}{W - 10}\, dW = \int -\frac{1}{8}\, dt\]
\[\ln|W - 10| = -\frac{1}{8}t + C\]
Since \(W(t) > 10\), \(|W - 10| = W - 10\):
\[\ln(W - 10) = -\frac{1}{8}t + C\]
Apply the initial condition \(W(0) = 90\):
\[\ln(90 - 10) = -\frac{1}{8}(0) + C \implies C = \ln(80)\]
Substitute \(C\) back into the equation:
\[\ln(W - 10) = -\frac{1}{8}t + \ln(80)\]
Exponentiating both sides:
\[W - 10 = e^{-\frac{1}{8}t + \ln(80)} = 80e^{-t/8}\]
\[W(t) = 10 + 80e^{-t/8}\]

(d)
\[\lim_{t \to \infty} W(t) = \lim_{t \to \infty} \left(10 + 80e^{-t/8}\right) = 10 + 0 = 10\]
As time increases without bound, the temperature of the metal block approaches \(10^\circ\text{C}\) (the ambient chamber temperature).

Marking scheme

Part (a): 2 points
- 1 point for the tangent line equation or slope: \(\left.\frac{dW}{dt}\right|_{t=0} = -10\).
- 1 point for the approximation: \(W(2) \approx 70\).

Part (b): 2 points
- 1 point for \(\frac{d^2W}{dt^2} = \frac{1}{64}(W - 10)\) (or equivalent in terms of \(W\)).
- 1 point for concluding underestimate with justification mentioning \(\frac{d^2W}{dt^2} > 0\) (or graph of \(W\) is concave up) because \(W(t) > 10\).

Part (c): 4 points
- 1 point for separation of variables: \(\frac{1}{W - 10}\, dW = -\frac{1}{8}\, dt\).
- 1 point for correct antiderivatives: \(\ln|W - 10| = -\frac{1}{8}t\).
- 1 point for constant of integration and using initial condition \(W(0) = 90\).
- 1 point for solving for \(W(t)\): \(W(t) = 10 + 80e^{-t/8}\).

Note: A response with no separation of variables earns 0/4 in part (c).

Part (d): 1 point
- 1 point for finding \(\lim_{t \to \infty} W(t) = 10\) and interpreting that the temperature of the metal block approaches \(10^\circ\text{C}\) as \(t \to \infty\).
Question 2 · Free-Response
9 marks
The function \(f\) is continuous on the closed interval \([-4, 6]\) and satisfies \(f(3) = 4\). The graph of \(f'\), the derivative of \(f\), consists of two line segments and a semicircle, defined as follows:
- A line segment from the point \((-4, 3)\) to \((-1, 0)\)
- A semicircle below the \(x\)-axis with radius \(2\) connecting \((-1, 0)\) and \((3, 0)\)
- A line segment from the point \((3, 0)\) to \((6, 3)\)

(a) Does \(f\) have a relative minimum, a relative maximum, or neither at \(x = -1\)? Justify your answer.

(b) On what open intervals, if any, is the graph of \(f\) concave down? Give a reason for your answer.

(c) Find the value of \(\lim_{x \to 3} \frac{f(x) - x - 1}{x^2 - 9}\), or show that it does not exist. Justify your answer.

(d) Find the absolute minimum value of \(f\) on the closed interval \([-4, 6]\). Justify your answer.
Show answer & marking scheme

Worked solution

(a) At \(x = -1\), \(f'(x) > 0\) on \((-4, -1)\) and \(f'(x) < 0\) on \((-1, 3)\). Since \(f'(x)\) changes from positive to negative at \(x = -1\), \(f\) has a relative maximum at \(x = -1\).

(b) The graph of \(f\) is concave down where \(f'\) is decreasing.
From the graph of \(f'\):
- On \((-4, -1)\), \(f'\) decreases from \(3\) to \(0\).
- On \((-1, 1)\), the lower semicircle decreases from \(0\) to \(-2\).
- On \((1, 3)\), the lower semicircle increases from \(-2\) to \(0\).
- On \((3, 6)\), \(f'\) increases from \(0\) to \(3\).
Therefore, the graph of \(f\) is concave down on the open intervals \((-4, -1)\) and \((-1, 1)\) (or \((-4, 1)\)) because \(f'\) is decreasing on these intervals.

(c) Because \(f\) is differentiable on \([-4, 6]\), \(f\) is continuous at \(x = 3\), so \(\lim_{x \to 3} f(x) = f(3) = 4\).
Evaluating the limits of the numerator and denominator separately:
\[\lim_{x \to 3} (f(x) - x - 1) = 4 - 3 - 1 = 0\]
\[\lim_{x \to 3} (x^2 - 9) = 3^2 - 9 = 0\]
Because the limit produces the indeterminate form \(\frac{0}{0}\), L'Hôpital's Rule can be applied:
\[\lim_{x \to 3} \frac{f(x) - x - 1}{x^2 - 9} = \lim_{x \to 3} \frac{f'(x) - 1}{2x} = \frac{f'(3) - 1}{2(3)} = \frac{0 - 1}{6} = -\frac{1}{6}.\]

(d) The critical points of \(f\) on \([-4, 6]\) occur where \(f'(x) = 0\), which are \(x = -1\) and \(x = 3\).
The candidates for the absolute minimum are the endpoints \(x = -4, 6\) and the critical points \(x = -1, 3\).
Using the Fundamental Theorem of Calculus with the initial condition \(f(3) = 4\):
- \(f(3) = 4\)
- \(f(6) = f(3) + \int_3^6 f'(t)\,dt = 4 + \frac{1}{2}(3)(3) = 4 + 4.5 = 8.5\)
- \(f(-1) = f(3) - \int_{-1}^3 f'(t)\,dt = 4 - \left(-\frac{1}{2}\pi(2^2)\right) = 4 + 2\pi \approx 10.28\)
- \(f(-4) = f(-1) - \int_{-4}^{-1} f'(t)\,dt = (4 + 2\pi) - \frac{1}{2}(3)(3) = 2\pi - 0.5 \approx 5.78\)

Comparing the candidate values, the absolute minimum value of \(f\) on \([-4, 6]\) is \(f(3) = 4\).

Marking scheme

Part (a): 1 point
- 1 point for the correct answer with justification based on the sign change of \(f'\).

Part (b): 2 points
- 1 point for identifying the intervals \((-4, -1)\) and \((-1, 1)\) (or \((-4, 1)\)).
- 1 point for the reason that \(f'\) is decreasing.

Part (c): 3 points
- 1 point for showing limits of numerator and denominator are both 0 separately.
- 1 point for correctly applying L'Hôpital's Rule.
- 1 point for the final answer of \(-\frac{1}{6}\).

Part (d): 3 points
- 1 point for considering \(f'(x) = 0\).
- 1 point for justification (evaluating candidates/endpoints or eliminating relative maximums).
- 1 point for identifying the absolute minimum value as \(4\).
Question 3 · Free-Response
9 marks
$$\begin{array}{|c|c|c|c|c|}\hline x & 1 & 3 & 5 & 8 \\hline f(x) & 6 & 2 & -1 & 4 \\hline f'(x) & -2 & 5 & \frac{1}{2} & -3 \\hline g(x) & 3 & 8 & 1 & -2 \\hline g'(x) & 4 & -1 & 6 & 7 \\hline\end{array}$$

The functions $f$ and $g$ are twice differentiable. The table shown gives values of the functions and their first derivatives at selected values of $x$.

(a) Let $p$ be the function defined by $p(x) = f(g(x))$. Find $p'(5)$. Show the work that leads to your answer.

(b) Let $k$ be a differentiable function such that $k'(x) = g(x) \cdot (f(x))^3$. Is the graph of $k$ concave up or concave down at the point where $x = 3$? Give a reason for your answer.

(c) Let $M$ be the function defined by $M(x) = 4x^2 + \int_{1}^{x} f'(t)\,dt$. Find $M(3)$. Show the work that leads to your answer.

(d) Is the function $M$ defined in part (c) increasing, decreasing, or neither at $x = 3$? Justify your answer.
Show answer & marking scheme

Worked solution

(a) By the chain rule, $p'(x) = f'(g(x)) \cdot g'(x)$.
Using values from the table:
$$p'(5) = f'(g(5)) \cdot g'(5) = f'(1) \cdot 6 = (-2) \cdot 6 = -12$$

(b) To determine the concavity of $k$, find $k''(x)$ using the product rule and chain rule:
$$k''(x) = g'(x) \cdot (f(x))^3 + g(x) \cdot 3(f(x))^2 \cdot f'(x)$$
Evaluate at $x = 3$:
$$k''(3) = g'(3) \cdot (f(3))^3 + 3 g(3) (f(3))^2 f'(3)$$
$$k''(3) = (-1)(2)^3 + 3(8)(2)^2(5) = (-1)(8) + 24(4)(5) = -8 + 480 = 472$$
Because $k''(3) = 472 > 0$ (and $k''$ is continuous), the graph of $k$ is concave up at $x = 3$.

(c) By the Fundamental Theorem of Calculus, $\int_{1}^{3} f'(t)\,dt = f(3) - f(1)$.
$$M(3) = 4(3)^2 + \int_{1}^{3} f'(t)\,dt = 4(9) + (f(3) - f(1))$$
$$M(3) = 36 + (2 - 6) = 36 - 4 = 32$$

(d) Applying the Fundamental Theorem of Calculus to differentiate $M(x)$:
$$M'(x) = \frac{d}{dx}\left[4x^2 + \int_{1}^{x} f'(t)\,dt\right] = 8x + f'(x)$$
Evaluate at $x = 3$:
$$M'(3) = 8(3) + f'(3) = 24 + 5 = 29$$
Because $M'(3) = 29 > 0$, the function $M$ is increasing at $x = 3$.

Marking scheme

Part (a): 2 points
- 1 point for applying the chain rule: $p'(x) = f'(g(x)) \cdot g'(x)$ or $p'(5) = f'(g(5)) \cdot g'(5)$
- 1 point for the correct answer: $-12$ with supporting work

Part (b): 3 points
- 1 point for correct derivative form using product and chain rules: $k''(x) = g'(x)(f(x))^3 + 3g(x)(f(x))^2 f'(x)$
- 1 point for computing $k''(3) = 472$ (or an unsimplified equivalent numeric expression)
- 1 point for concluding 'concave up' with a reason consistent with a positive value of $k''(3)$

Part (c): 2 points
- 1 point for applying FTC: $\int_{1}^{3} f'(t)\,dt = f(3) - f(1)$
- 1 point for the correct answer: $32$ (or $36 + (2 - 6)$)

Part (d): 2 points
- 1 point for finding $M'(x) = 8x + f'(x)$ and evaluating $M'(3) = 29$
- 1 point for answer 'increasing' with justification that $M'(3) > 0$
Question 4 · free-response
9 marks
Consider the curve defined by the equation \( 2x^2 - 2xy + y^2 = 10 \).

(a) Show that \( \frac{dy}{dx} = \frac{y - 2x}{y - x} \).

(b) Find the coordinates of all points on the curve where the line tangent to the curve is horizontal.

(c) Find the coordinates of all points on the curve where the line tangent to the curve is vertical, or explain why no such points exist.

(d) A particle moves along the curve so that its position at time \( t \) is \( (x(t), y(t)) \). At the instant when the particle is at the point \( (1, 4) \), the rate of change of its horizontal position is \( \frac{dx}{dt} = 6 \) units per second. Find the value of \( \frac{dy}{dt} \), the rate of change of the particle's vertical position with respect to time, at this instant.
Show answer & marking scheme

Worked solution

(a) Differentiating both sides of \( 2x^2 - 2xy + y^2 = 10 \) implicitly with respect to \( x \):
\[ \frac{d}{dx}(2x^2) - \frac{d}{dx}(2xy) + \frac{d}{dx}(y^2) = \frac{d}{dx}(10) \]
\[ 4x - \left(2y + 2x\frac{dy}{dx}\right) + 2y\frac{dy}{dx} = 0 \]
\[ 4x - 2y + (2y - 2x)\frac{dy}{dx} = 0 \]
\[ (2y - 2x)\frac{dy}{dx} = 2y - 4x \]
\[ \frac{dy}{dx} = \frac{2(y - 2x)}{2(y - x)} = \frac{y - 2x}{y - x} \]

(b) A tangent line is horizontal when \( \frac{dy}{dx} = 0 \) and the denominator is nonzero. Thus, we set \( y - 2x = 0 \implies y = 2x \) (with \( y \neq x \)).
Substituting \( y = 2x \) into the original equation \( 2x^2 - 2xy + y^2 = 10 \):
\[ 2x^2 - 2x(2x) + (2x)^2 = 10 \]
\[ 2x^2 - 4x^2 + 4x^2 = 10 \implies 2x^2 = 10 \implies x^2 = 5 \implies x = \pm\sqrt{5} \]
When \( x = \sqrt{5} \), \( y = 2\sqrt{5} \).
When \( x = -\sqrt{5} \), \( y = -2\sqrt{5} \).
At both points, the denominator \( y - x \neq 0 \).
Therefore, the points with a horizontal tangent are \( (\sqrt{5}, 2\sqrt{5}) \) and \( (-\sqrt{5}, -2\sqrt{5}) \).

(c) A tangent line is vertical when the denominator of \( \frac{dy}{dx} \) is zero and the numerator is nonzero. Thus, \( y - x = 0 \implies y = x \) (with \( y \neq 2x \)).
Substituting \( y = x \) into the original equation \( 2x^2 - 2xy + y^2 = 10 \):
\[ 2x^2 - 2x(x) + x^2 = 10 \]
\[ 2x^2 - 2x^2 + x^2 = 10 \implies x^2 = 10 \implies x = \pm\sqrt{10} \]
When \( x = \sqrt{10} \), \( y = \sqrt{10} \).
When \( x = -\sqrt{10} \), \( y = -\sqrt{10} \).
At both points, the numerator \( y - 2x = -x = \mp\sqrt{10} \neq 0 \).
Therefore, the points with a vertical tangent are \( (\sqrt{10}, \sqrt{10}) \) and \( (-\sqrt{10}, -\sqrt{10}) \).

(d) Differentiating \( 2x^2 - 2xy + y^2 = 10 \) implicitly with respect to \( t \):
\[ 4x\frac{dx}{dt} - 2y\frac{dx}{dt} - 2x\frac{dy}{dt} + 2y\frac{dy}{dt} = 0 \]
\[ (4x - 2y)\frac{dx}{dt} + (2y - 2x)\frac{dy}{dt} = 0 \]
Substituting \( x = 1 \), \( y = 4 \), and \( \frac{dx}{dt} = 6 \):
\[ (4(1) - 2(4))(6) + (2(4) - 2(1))\frac{dy}{dt} = 0 \]
\[ (4 - 8)(6) + (8 - 2)\frac{dy}{dt} = 0 \]
\[ -24 + 6\frac{dy}{dt} = 0 \implies 6\frac{dy}{dt} = 24 \implies \frac{dy}{dt} = 4 \]
Alternatively, using the chain rule \( \frac{dy}{dt} = \frac{dy}{dx}\cdot\frac{dx}{dt} \):
\[ \left.\frac{dy}{dx}\right|_{(1,4)} = \frac{4 - 2(1)}{4 - 1} = \frac{2}{3} \]
\[ \frac{dy}{dt} = \left(\frac{2}{3}\right)(6) = 4 \text{ units per second}. \]

Marking scheme

Part (a): 2 points
• 1 pt: Correct implicit differentiation of \( 2x^2 - 2xy + y^2 = 10 \)
• 1 pt: Verification to isolate \( \frac{dy}{dx} = \frac{y-2x}{y-x} \)

Part (b): 2 points
• 1 pt: Sets \( y - 2x = 0 \) (or \( y = 2x \))
• 1 pt: Coordinates of both points \( (\sqrt{5}, 2\sqrt{5}) \) and \( (-\sqrt{5}, -2\sqrt{5}) \)

Part (c): 2 points
• 1 pt: Sets \( y - x = 0 \) (or \( y = x \))
• 1 pt: Coordinates of both points \( (\sqrt{10}, \sqrt{10}) \) and \( (-\sqrt{10}, -\sqrt{10}) \)

Part (d): 3 points
• 1 pt: Chain rule expression \( \frac{dy}{dt} = \frac{dy}{dx}\cdot\frac{dx}{dt} \) OR differentiation with respect to \( t \)
• 1 pt: Evaluation of \( \frac{dy}{dx} = \frac{2}{3} \) at \( (1,4) \) OR substitution of known values into related rates equation
• 1 pt: Answer \( \frac{dy}{dt} = 4 \)

Wondering how well you actually know this?

thinka is an AI practice app for IGCSE & IB students: unlimited questions, instant auto-marking, and detailed step-by-step solutions. 100,000+ students use it to confirm they actually know it, not just think they do.

Want more questions like this? Practice unlimited on thinka, instant answers included.

Start Practicing Free