CCEA AS Life and Health Sciences: where the 225 marks across Body Systems, Physical Chemistry and Material Science go, the unit-conversion and definition slips that cost the most, and how to structure the QWC question in each paper.
閱讀時間 4 分鐘更新於: 2026年9月3日
試卷概覽
卷數
3
總分
225
考試時間
4小時 30分鐘
題型
12
試卷
時間
分數
題數
比重
題型
AS 2: Human Body Systems
1小時 30分鐘
75
7
33%
Short Answer & Anatomical Recall, Data Analysis & Evaluation, Graphical Construction & Interpretation, Quality of Written Communication (QWC), Biochemical Explanation
AS 3: Physical Chemistry in Industrial Processes
1小時 30分鐘
75
5
33%
Industrial Recall & Process Definition, Stoichiometry & Molar Yield Calculations, Procedural Practical Description, Enthalpy & Calorimetry Calculations, Quality of Written Communication (QWC), Equilibrium & Rate Interpretation
AS 5: Material Science
1小時 30分鐘
75
7
34%
Matching & Material Categorisation, Microscopic Structure & Recall, Material Property Data Interpretation, Quality of Written Communication (QWC), Mechanical Stress/Strain & Young Modulus Calculations
評級
ABCDE
計算機規定
No subject-specific calculator restriction is stated beyond the general CCEA and JCQ rules: calculators are permitted for the numeric calculations in all three papers (stoichiometry, enthalpy, stress and strain), but must not have any retrievable information stored in them and must not offer symbolic algebra manipulation, language translation, or communication with other machines or the internet.
AO1: AO1: demonstrate knowledge and understanding of scientific ideas, processes, techniques and procedures. (45%)
AO2: AO2: apply knowledge and understanding of scientific ideas, processes, techniques and procedures in a range of theoretical and practical contexts, and when handling qualitative and quantitative data, to solve scientific problems. (31%)
AO3: AO3: analyse, interpret and evaluate a range of scientific information, ideas and evidence to make judgements and reach conclusions, including in relation to issues, and to refine practical design and procedures. (24%)
用途: Hold an intermediate value, such as a converted diameter or a partial enthalpy sum, without retyping it later in the same question.
使用時機: Hess cycle and stress/strain calculations where an early converted value or sub-total is needed again two or three steps later.
步驟
Calculate the value, press the memory store key and a letter to save it, continue with the rest of the working, then recall it with the same letter when needed again.
考試提示: Clear the memory at the start of the exam and only store values calculated live during the paper, this is not a saved program.
Stepwise arithmetic, not calculator-only working
Any CCEA-permitted scientific calculator
用途: Keep the shown method that earns credit visible on the page, even where the final number is wrong.
使用時機: Stoichiometry, molar yield and titration questions in AS 3, and stress/strain calculations in AS 5.
步驟
Write the formula and the substitution with units on paper first, then key the numbers into the calculator only for the arithmetic step, and copy the result back onto the page.
考試提示: The calculator performs only the arithmetic here, live during the exam, it holds no stored formulae or notes.
Statistics mode for repeated readings
Casio fx-991EX ClassWiz (or equivalent)
用途: Find the mean of several repeat readings quickly and accurately.
使用時機: Practical description or data questions involving repeated titre volumes or extension measurements.
步驟
Open statistics mode, key in each repeat reading pressing equals after each, then read the mean from the variable menu and quote it with the correct number of significant figures.
考試提示: This uses only the readings given or measured during the exam, entered live, nothing is stored from before the exam.
常見錯誤
1high涉及分數: 2Practical calculations, units
Leaving a wire's diameter or a volume in millimetres or cm3 when substituting into a formula, instead of converting to metres or dm3 first.
如何避免: Convert every measurement to the units the formula needs as a separate first line, before any substitution.
2high涉及分數: 2Definitions, energetics and homeostasis
Giving an incomplete definition of standard enthalpy change or negative feedback, missing 'one mole' and 'standard conditions', or missing that the corrective mechanism switches off at the set point.
如何避免: Learn definitions as complete sentences with every required clause, not as a single keyword, and write out the full sentence in the answer.
3medium涉及分數: 1Industrial processes, catalysis
Confusing adsorption with absorption when describing a heterogeneous catalyst such as a car exhaust converter.
如何避免: State explicitly that adsorption is the catalyst's surface binding gas molecules, distinct from absorption, which draws a substance into the bulk of a material.
4high涉及分數: 3Energetics, Hess cycles
Forgetting to multiply standard enthalpy of formation or combustion values by the stoichiometric coefficient for each species in a Hess cycle, for example missing the factor of two for water in a combustion equation.
如何避免: Write the balanced equation first and label each species with its coefficient before pulling any enthalpy value into the cycle.
5medium涉及分數: 2Material science, stress and strain
Calculating cross-sectional area for Young's modulus questions from the diameter instead of the radius, or leaving the measurement in millimetres.
如何避免: Halve the diameter to get the radius and convert to metres before squaring in the area formula.
6medium涉及分數: 2Kinetics, graph drawing
Drawing a lower-temperature Maxwell-Boltzmann curve with its peak shifted to the right, or starting a rate or stress-strain graph away from the origin.
如何避免: Remember a lower temperature shifts the peak left and higher, and always start these curves cleanly through the origin.
7high涉及分數: 4QWC, extended response
Writing a generic, unbalanced Quality of Written Communication answer that covers only one side of a two-sided prompt, such as only risks and not benefits.
如何避免: List every bullet point in the question stem before writing, and structure the answer so each one gets its own paragraph with specialist vocabulary.
8medium涉及分數: 2Practical methods
Describing a practical method without naming the specific apparatus, such as a volumetric flask or micrometer screw gauge, or without stating that readings were repeated.
如何避免: Name the exact piece of equipment for every step of the method, and state the number of repeat readings taken.