2024 IB DP Design technology 模擬試題連答案詳解

Rotational molding is the premier method for manufacturing large, hollow, stress-free plastic parts because the plastic powder melts and coats the inner walls of a rotating closed mold. Injection molding is for solid or complex open-faced parts; blow molding is for smaller packaging like bottles; compression molding is primarily for thermosetting polymers.

Award 1 mark for selecting the correct option (b). No partial marks.

Dematerialization is defined as the reduction of total material and energy throughput of any product and service. It aims to yield the same or better performance with fewer physical resources.

Award 1 mark for selecting the correct option (b). No partial marks.

Empathetic modeling involves designers using physical aids (like heavy suits, foggy glasses, or weighted gloves) to simulate the physical constraints of a user group, allowing them to gain direct insights into their experiences.

Award 1 mark for selecting the correct option (b). No partial marks.

Relative decoupling occurs when the growth rate of environmentally damaging parameters (like resource consumption) is positive but less than the economic growth rate (GDP).

Award 1 mark for selecting the correct option (b). No partial marks.

Mass customization is a marketing and manufacturing technique that combines the flexibility and personalization of custom-made products with the low unit costs associated with mass production.

Award 1 mark for selecting the correct option (a). No partial marks.

For clearance dimensions (like door heights or cabin heights), designers use the 95th percentile (or taller) to ensure that the majority of the population (95%) can pass through comfortably without having to bend down.

Award 1 mark for selecting the correct option (c). No partial marks.

An instrumented model is a physical model equipped with sensors (such as load cells, pressure transducers, or strain gauges) to capture quantitative performance data during tests.

Award 1 mark for selecting the correct option (c). No partial marks.

An imitative strategy involves rapidly copying or adapting a competitor's product innovations to enter the market quickly with reduced R&D costs and lower risk.

Award 1 mark for selecting the correct option (b). No partial marks.

Plywood is a composite timber material constructed by gluing together thin sheets of wood veneer. Adjacent layers of veneer have their grain directions rotated 90 degrees to each other, which significantly increases dimensional stability and overall mechanical strength while reducing splitting and warping.

Award 1 mark for selecting option B. Other options describe MDF (option A), laminated veneer lumber/blockboard (option C), or particleboard/chipboard (option D).

Dematerialization is the reduction of the total material and energy throughput of a product or service. Redesigning a product to use fewer raw materials to perform the same function directly addresses dematerialization. Option B represents design for disassembly/recyclability, option C represents biodegradable material substitution, and option D represents product-service systems.

Award 1 mark for selecting option A.

A persona is a profile of an archetypal, fictional target user created based on real user research. It helps the design team empathize with, understand, and make informed decisions based on the needs, behaviors, experiences, and goals of that specific user group.

Award 1 mark for selecting option B. Option A describes the average user in anthropometrics. Option C describes user testing. Option D describes patent/IP documentation.

Pre-production encompasses the extraction of raw materials and their transport to the manufacturing site. Production includes the actual manufacturing processes, distribution covers packaging and shipping finished products to consumers, and disposal deals with the end-of-life stage.

Award 1 mark for selecting option A.

Rotational moulding is specifically used to manufacture hollow, seamless, stress-free plastic parts of large volumes. While blow moulding is also used for hollow parts, it is generally limited to smaller products (like bottles) and has seam lines. Injection moulding is not suitable for large, completely hollow enclosed vessels.

Award 1 mark for selecting option C.

To accommodate the largest possible percentage of the population (typically 90%), designers use the range from the 5th percentile to the 95th percentile, which excludes only the extreme 5% at the very low and very high ends of the spectrum.

Award 1 mark for selecting option D. Single percentiles (options A, B, and C) do not accommodate a broad range of the population.

Haptic models incorporate force feedback or tactile sensations, allowing designers and prospective users to experience physical interactions through the sense of touch. This helps evaluate ergonomics, comfort, and usability of hand-held devices.

Award 1 mark for selecting option B. Option A describes CAD FEA testing. Option C describes CAD drafting. Option D describes digital visual rendering.

Penetration pricing is a strategy where a low price is set initially to secure high market share in a highly competitive market. It relies on consumers being price-sensitive (highly elastic demand) so they are willing to switch to the cheaper, newly introduced product.

Award 1 mark for selecting option B. Option A and D align with price skimming. Option C is associated with niche targeting/premium pricing.

Popliteal height is the distance from the underside of the foot to the underside of the thigh just behind the knee. To allow a user to sit comfortably with their feet flat on the floor, the seat height must adjust to match this dimension across the target user population (typically the 5th to 95th percentile).

Award 1 mark for the correct option (b). Reject other options as they refer to body width, torso length, or leg length in a seated depth perspective.

Computational fluid dynamics (CFD) is a virtual modelling tool that simulates the behavior of fluids (including air) flowing past complex surfaces. This allows rapid iterative digital testing of aerodynamic drag before any physical prototypes are constructed.

Award 1 mark for the correct option (b). Reject physical testing options or structural analysis methods (FEA) as they do not address fluid/aerodynamic behavior virtually.

Blow moulding is the primary commercial process used to manufacture hollow thermoplastic shapes like bottles. A molten tube of plastic (parison) is inflated inside a mould cavity, allowing high production speeds and thin, uniform walls.

Award 1 mark for the correct option (b). Reject other options as they are used for flat forms (vacuum forming), solid complex forms (injection moulding), or low-volume/heavy-walled hollow structures (rotational moulding).

Design for Disassembly (DfD) is a strategy that simplifies the recovery of materials and components at the end of a product's life. Reducing part counts and standardizing fasteners directly supports fast, non-destructive disassembly.

Award 1 mark for the correct option (b). Reject dematerialization (which focuses primarily on material volume/weight reduction), modular design (which focuses on modular swapping of sub-systems), and reconditioning (which is a recovery process itself, not a design-phase strategy).

Naturalistic observation involves observing users in their real, unaltered environments while they perform routine tasks. This minimizes observer bias and reveals authentic interactions and friction points.

Award 1 mark for the correct option (c). Reject focus groups (interviews), usability laboratories (artificial testing environments), and persona creation (a synthesis tool rather than a field observation method).

The distribution and packaging stage covers all environmental impacts and energy costs associated with transporting raw materials, parts, and finished products between suppliers, factories, and commercial markets.

Award 1 mark for the correct option (c). Reject other LCA stages as they deal with resource extraction (pre-production), manufacturing operations (production), or consumer usage (utilization).

Just-In-Time (JIT) reduces waste by producing items only as they are needed in the production cycle, thereby minimizing inventory holding costs and reducing the capital tied up in warehousing raw materials and unsold stock.

Award 1 mark for the correct option (a). Reject options highlighting stockpiles (which is the opposite of JIT), 100% inspection (which relates to QA/QC), or equipment cost reduction (which does not depend directly on inventory management scheduling).

Disruptive innovation introduces products that initially may perform differently or target niche segments, but eventually redefine the market norms, displace established industry leaders, and render older technologies obsolete.

Award 1 mark for the correct option (b). Reject incremental/sustaining (which improve existing technology iteratively) and architectural (which rearrange existing subsystems without introducing a fundamentally new core technology).

Kiln seasoning involves placing timber in a controlled temperature and humidity chamber. Because the drying process is rapid and controlled, it significantly reduces the time that timber spends in a high-moisture state, thereby minimizing the opportunity for fungal attack and decay. The elevated temperatures in a kiln also kill any existing insect larvae or fungal spores present in the wood.

Award [1] for the correct answer B. Award [0] for any incorrect option.

Thermosetting polymers (such as polyurethane) have strong covalent cross-links between their polymer chains. These cross-links hold the structure rigid when heated, preventing the polymer chains from sliding past each other. When subjected to excessive heat, they will burn or char rather than melt, making them impossible to reshape through thermal recycling.

Award [1] for the correct answer C. Award [0] for any incorrect option.

Dematerialization refers to the reduction of the total material and energy throughput of any product and service. By thinning the bottle walls, the company uses less raw material to achieve the exact same product functionality.

Award [1] for the correct answer C. Award [0] for any incorrect option.

Embodied energy is the sum of all energy required to produce any goods or services, considered as if that energy was incorporated or 'embodied' in the product itself. This includes the energy for raw material extraction, transport, processing, assembly, and transport to the consumer.

Award [1] for the correct answer C. Award [0] for any incorrect option.

A persona is a profile of a fictional, yet realistic, target user. It is created based on real data collected from user research (such as interviews and observations) to help designers maintain focus on the specific needs, capabilities, and goals of a typical user throughout the design process.

Award [1] for the correct answer B. Award [0] for any incorrect option.

Type I eco-labels are voluntary, multi-criteria schemes operated by an independent third party. They award a license authorizing the use of environmental labels on products that meet specific, pre-determined environmental criteria based on life-cycle considerations.

Award [1] for the correct answer B. Award [0] for any incorrect option.

Just-in-Time (JIT) manufacturing relies on receiving components only as they are needed in the production process, minimizing warehousing and holding costs. However, this leaves the manufacturer highly vulnerable to supply chain disruptions (such as logistics delays, strikes, or natural disasters) which can immediately halt production.

Award [1] for the correct answer B. Award [0] for any incorrect option.

To ensure clearance (making sure people can safely pass through without bumping their heads), design must accommodate the tallest users. Therefore, the 95th percentile (or higher, e.g., 99th percentile) must be used. Designing for the 5th percentile would make the door too short for 95% of the population.

Award [1] for the correct answer C. Award [0] for any incorrect option.

Kiln drying is a controlled process that uses heat and forced air circulation to dry timber. This method is significantly faster than air drying, which can take months or years, and it allows precise control over the final moisture content of the timber, minimizing defects.

Award 1 mark for identifying option B. All other options describe incorrect properties or characteristics of kiln drying (e.g., kiln drying requires substantial energy input, and while it reduces warping during the drying process, it cannot prevent wood from absorbing moisture and warping in the future).

Dematerialization involves reducing the amount of materials and energy used in the design and manufacture of a product. Redesigning a plastic water bottle to use 30% less polymer while maintaining its performance directly reduces material consumption.

Award 1 mark for identifying option B. Option A replaces one material with another. Option C describes design for disassembly/repair. Option D focuses on renewable energy, not dematerialization.

A persona is a profile of a target user created based on research. It represents a user group with shared characteristics, needs, and goals, which helps design teams empathize and make user-focused design decisions.

Award 1 mark for identifying option C. Personas are archetypes based on user research, not real specific individuals (A), mechanical models (B), or legal instruments (D).

Relative decoupling occurs when resource use or environmental impact increases, but at a slower rate than the rate of economic growth. This is in contrast to absolute decoupling, where resource use declines in absolute terms while the economy grows.

Award 1 mark for identifying option A. Option B refers to absolute decoupling. Option C describes total decoupling. Option D refers to resource substitution.

Because JIT manufacturing relies on components and raw materials arriving exactly when needed on the production line, any disruption in the supply chain (such as transport strikes or raw material shortages) can halt production immediately.

Award 1 mark for identifying option C. JIT reduces warehousing costs (A) and waste (B). It can affect flexibility depending on implementation, but its most critical vulnerability is supply chain disruption (C).

When designing for clearance (such as doorway heights), the designer must accommodate the tallest potential users. This means using the 95th percentile value of the tallest segment of the population (typically males) to ensure safe clearance for at least 95% of all users.

Award 1 mark for identifying option C. Designing for the 5th percentile (A or D) or 50th percentile (B) would result in a door that is too low for a large portion of the population.

High-fidelity models are highly finished and detailed representations of the final design. In the early stages of design, concepts change rapidly. High-fidelity models are time-consuming and expensive to modify, making them less suitable than low-fidelity models for rapid exploration.

Award 1 mark for identifying option C. High-fidelity models can evaluate ergonomics (A) and aesthetics (B). Many can also be stress-tested (D).

Technology push occurs when scientific research or technological advancement leads to a new product being pushed to the market before consumer demand is established. The development of high-efficiency solar cells leading to a new solar backpack is a classic technology-push scenario.

Award 1 mark for identifying option B. Options A and C represent "market pull" (driven by consumer demand). Option D represents legislation/regulatory drive.